I need advice on cab console removal

[Sarka]

Hey all, how do I remove the control console inside the cab? It looks like it should lift out together with the CEBIS monitor. I need to access and remove the Ag Leader gear, DigiFarm modem, and navigation unit from underneath to transfer them back to my tractor for spring strip-tilling, any suggestions?

 

[murd0ch-75]

You're on the right track! there's usually an M8 bolt near the front window that holds the console in place. Once you loosen it, the whole unit that includes the CEBIS monitor should swing up for access

 

[Timmytimothy]

I think it would be helpful for the experts here to mention the specific model and year. Also, as @murd0ch-75 there has to be a bolt, there's always some kind of a bolt that's hiding. Since you're planning on doing this, I can advise you to be careful with the wiring and electronics, just in case.

 

[HarveyHauls]

Hey all, how do I remove the control console inside the cab? It looks like it should lift out together with the CEBIS monitor. I need to access and remove the Ag Leader gear, DigiFarm modem, and navigation unit from underneath to transfer them back to my tractor for spring strip-tilling, any suggestions?

I agree with @Timmytimothy that it's helpful to mention the specific model. But anyway, if what @murd0ch-75 didn't work, try unbolting the entire armrest assembly from the floor. There are often a few bolts at the base of the console, sometimes covered by plastic caps. Once these are removed, the entire assembly, including the armrest, should be able to lift up, giving you access to the wiring harnesses and any aftermarket modules like your Ag Leader gear or modem that are mounted underneath.